Milestone InstrumentsMilestone Instruments
Milestone Instruments Milestone Instruments Milestone Instruments Milestone Instruments
Milestone InstrumentsMilestone Instruments
Milestone Instruments


Milestone Instruments
Home » Our Products » Thermal Testing Instruments

Thermal Testing Instruments




1 - 2 - 3 - 4 - 5


MI.TH-1072
High Temperature Furnace 1200ºC
Double walled , inner chamber made of grooved refractory fitted with Kanal -1 Heating coils to give maximum heat inside the chamber. The gap between the two chambers is filled with high density ceramic insulation which results the low heat loss. Provided with mains, main& heating indicator, energy regulator, thermocouple. Max. temp. 1200ºC, working temp. 1150ºC.
Muffle Size Rating
100 x 100 x 225 mm (4" x 4" x 9") 2.5 kw
125 x 125 x 250 mm (5" x 5" x 10") 3.0 kw
150 x 150 x 300 mm (6" x 6" x 12") 4.0 kw
200 x 200 x 300 mm (8" x 8" x 12") 5.0 kw
200 x 200 x 450 mm (8" x 8" x 18") 6.0 kw
300 x 300 x 300 mm (12"x12"x12") 6.0 kw
300 x 300 x 300 mm (12"x12"x18") 9.0 kw
Digital temp controller cum indicator can be filled

request a quote




MI.TH-1073
High Temprature Muffle Furnace
This unit is specially designed to meet the requirements of High Temperature, the casing is made of M.S. reinforced with iron angles duly painted, chamber made of Ceramic Zirconium Board and elements are placed Horizontally in the chamber. Heating is done by imported silicon carbide rods duly controlled by Accurate step down transformer (Air cooled), it saves energy upto 30% with easily replaceable carbide rods. These furnaces have outstanding temperature reliability and have large surface radiation ratio to enhance thermal efficiency and power consumption. Control panel is fitted with Digital Temperature Indicator cum Controller upto1600°C. Control panel is provided separately having ammeter and volt meter etc. Maximum furnace temperature upto 1450°C, working temperature up to 1400°C opera table on 220 Volts single Phase AC supply.
Chamber Size
100 x 100 x 225
125 x 125 x 250
150 x 150 x 300
200 x 200 x 300
For other sizes Digital temp controller cum indicator can be filled
request a quote




MI.TH-1074
Laminar Air Flow Cabinet (Horizontal)
Laminar air flow cabinets able to create particle free air of Class-II standard. The cabinet is fabricated out of board with sun mica laminated exterior. The working table is made of thick board which is also sun mica at top. Laminar flow is based on principle of double filtration of air. Atmospheric air will be drawn through the pre-filters by heavy duty blowers. Filtered air than passed through highly effective HEPA Filters with 99.97% efficiency for particulates of 0.3 micron or larger, which can filter almost all air born contaminants such as dust, fungal spores, bacteria etc. Double filtered laminar flow air will blow horizontally/vertically through the working table at a nominal velocity or approx 90 Fts/min. Heavy duty blowers dynamically balanced with 0.25 HP electric motor are mounted on shock resistant base of cabinet or anti-vibration pads, operate on 230 +/- 10 volts, 50 Hz AC supply. Shadow less uniform lighting is provided within working space (100 feet candles). Unit will be mounted on caster wheel and supplied with high quality plug and cord.
Horizontal HLF-2 HLF-2 HLF-2 HLF-2
Working Area 2' x 2' x 2' 3' x 2' x 6' 4' x 2' x 2' 6' x 2' x 2'
Size of HEPA-Filter 2' x 2' x 6' 3' x 2' x 6' 4' x 2' x 6' 6' x 2' x 6'
No. of HEPA Filter 01 01 01 02
No. of Pre-Filters 01 02 02 03
Illumination 1 x 20 W 1 x 20 W 2 x 40 W 2 x 40 W
Optional Accessories
Satin finish Table S/S Table Top (in lieu of Sunmika Top)
2 x 2 x 2'
3 x s x 2'
4 x 2 x 2'
6 x 2 x 2'
request a quote




MI.TH-1075
Laminar Air Flow Cabinet (Vertical)
request a quote




MI.TH-1076
Innoculation Chamber / Tissue Culture Hood
Made of thick wooden board covered with sun mica. Working table also covered with sun mica. Front fitted with transparent plexi glass with option to lift the door up. Side also made of fixed plexi glass. Provided with glove ports gauntlets on front, one fluorescent tube and U.V. Light.
Size :
40"x 24" x 22"
22" x 20" x 16"
request a quote




MI.TH-1077
Biological Safety Cabinet
The cabinet is fabricated out of thick board duly sun mica covered. Interior surface is epoxy painted for durability and better finish. The work table is made of heavy gauge stainless steel and fitted with UV germicidal light. Static pressure manometer & exhaust system. Side panel is made out of thick transparent glass duly framed. The unit is fitted with pre filter and made it pass through highly effective HEPA filter having efficient of retaining all air-borne particles of size 0.3 micron of large. Motor of 0.25 HP operates with minimum noise level. The working table provides a comfortable sit down working position for the operator. Apart from all the facilities of vertical laminar air flow, bio safely cabinet have arrangement for re-circulation of air thus creating highest level of clean air, supplied complete with glove ports and gauntlets in the acrylic front sliding door, Suitable to work on 220/230V, 50 Hz. Single phase AC supply.
Working Area 2' x 2' x 2' 4' x 2'x 2' 6' x 2' x 2'
Size. of HEPA-F 2' x 2' x 2' 4' x 2' x 6' 3' x 2' x 6'
No. of HEPA-F 01 01 02
Illumination 1 x 20W 1 x 40W 1 x 40W

request a quote




MI.TH-1078
Fume Hood
Thick wooden board fabricated, outer is finished with Laminated Mica and inner duly painted, designed so as throw out all toxic/harmful vapors, thus protecting costly instruments and the person working in the lab. Working table top is fitted with acid/ alkali resistant tile. Provided with a Stainless Steel Sink with provision for water tap & outlet. The front door moves vertically up & down with concealed counter balanced weight/by Hinges The unit is fitted with fluorescent light and a gas cock for gas/air supply. The space under the work station can be provided with switches for exhaust system and fluorescent lights. Workable on 220 Volts AC supply.
Working Size 4'x2'x2' 6'x2'x2' 5'x3'x3' 7'x3'x2' 8'x3'x3'
Optional Accessories: Exhaust System, PVC Fume Duct , Storage Compartments, FRP/SS lining on working walls
request a quote




MI.TH-1079
Tissue Culture Rack With Timer
Made of tubular M.S. / Aluminum pipes duly painted fpr longer life. Each rack of size 48"x21" (Depth) is covered with thick unbreakable Plexiglas's/ Aluminum sheet. Distance between each rack is 15". Each rack is fitted with 4 fluorescent tubes, 4 bulbs and one U.V. germicidal light. Electronic chokes are fitted on the rack to avoid the heat generation.
Racks Flourescent Tubes Flourescent Bulbs UV Light
4 16 16 4
5 20 20 5
6 24 24 6

request a quote




MI.TH-1080
Rotary Vaccum Evaporated (Buchi Type)
The apparatus consists of an evaporated flask rotated by non sparking induction motor in a heating water bath. Vacuum distillation of solvent at high ad low temperature is achieved quickly and efficiently by use of a fixed speed motor, which prevents foaming and bumping of the liquid (solvent) into the evaporating flask and also distillation under controlled atmosphere. The evaporating flask is pear shaped to give a large surface area of evaporation and is clamped to a glass duct which goes through the drive unit and protrudes about 120mm into the condenser. The condenser is fitted with standard joint at the top and the bottom for receiver flask. The unit is fitted with a quick action jack.
request a quote




MI.TH-1081
Bottle Washing Machine With Tank (Gi-Sheet)
Size 20"x30"x12" with two brushes, 12 rinsors and 2 drill chucks
Following size is tank also available.
1. Size 30" x 20" x 18"
2. Tank size 30" x 20" x 18"
request a quote




MI.TH-1082
Agate Pastle And Mortar (Fisher Type)
Mainly used for grinding of material which are not gummy of fibrous. Mortar revolves and pastel moves back and forth in a pattern reaching all parts of the mortar. The adjustable post can hold 75 to 135mm dia motor. The grinding vessel and mortar and completely covered by clean acrylic sheet. Built in timer permits of agate pastle mortar75mm and 100 mm Dia to operate at 220 Volts
request a quote




MI.TH-1083
Pipette Washer
Automatic pipette washer completely made of stainless steel, can accommodate pipettes upto 375mm in length. It is based on the principles of agitation and strong suction developed by water during repeated filling and siphoning.
request a quote




MI.TH-1084
Pipette Drier (Electrical)
Made of Stainless Steel, drying heater of 250 Watts fitted in base chamber size 480 mm height and 140mm Dia can accommodate glass wares upto 375mm height. Operates on 220 Volts AC.
request a quote




MI.TH-1085
Butyro Reflactometer (Oil & Sugar Recractometer)
It has a double scale. One is oil scale (Butyro scale) having range of 0 to 100 and accuracy of ±0.1 read directly on the micrometer. The other is sugar scale having a range of 50-80% with an accuracy of ± 1% also read direct on scale.
request a quote




MI.TH-1086
Abbe Refractometer
Used for measuring refractive index in the range 1.3 to 1.7 with an accuracy of 0.001 direct on scale and 0.0001 by estimation, sugar percentage range of 0 to 95% with an accuracy of 1% on scale and 0.1 by estimation can be measured. Complete with test piece, contact liquid and thermometer in wooden cabinet.
request a quote



MI.TH-1087
Ultra Violet Flourescent Analysis Cabinet (Combined)
For visualization of test objects under U.V. tube having long wavelength (365mm) and short wavelength (254mm) as desired. A fluorescent tube is fitted to the unit for day light visualization. Supplied with three tubes works on 220/230 Volts AC.
Optional accessories a) With long wave-short wave and day light tube
request a quote




MI.TH-1088
Needle Destroyer
Recommended by Pollution Control Boards as a must for all private practitioners, dispensaries, nursing homes and hospitals, this automatic device is easy to use, quick in action portable, noise free, odorless, pollution free, maintenance free and economize. Destroys all sizes of needles from 18G to 26G
request a quote




MI.TH-1089
Thin Layer Chromatography Kit (T.C.L.)
The T.C.L. Set is designed for conduction chromatographic separation. Complete with applicator (thickness of the layer varied from 0.1 mm to 0.2 mm), thin layer drawing board, drawing rack, developing chamber, Aluminum carrier spotting jug, silica gel, micro pipette 0.1 ml, spare glass plates, square and rectangular glass plates and glass sprayer
request a quote




MI.TH-1090
Magnetic stirrer with D.C. Motor and Electronic Speed Regulator
Magnetic stirrer with D.C. Drive Motor and Electronic Speed Regulator With Hot Plate And Without Hot Plate , Having Following capacity 1Ltr, 2Ltr, 5Ltr and 10Ltr

request a quote




MI.TH-1091
Hand Refractometer
These instruments are widely used for measuring the sugar concentration of sugar cane. Fruit juice syrups, jams,cola confectionary products are liquids. Following range is available.
Range:
0-32%
28-62%
58-92%
0-50%
40-85%




MI.TH-1092
Research Polarimeter
The overall improvement in its optical design, ensures permanent and undisturbed focus, its highly accurate glass scale is divided to read angular degrees and also carries sugar scale in ISS units. The angular scale from 0 to 360 Degrees are sub divided to 1 degree to enable direct reading to 0.05 degree and by estimation to 0.02 sugar degrees. The sugar scale from 30 degree to 120 degree. Supplied complete with polar meter tube, sodium lamp, and transformer instruction manual. Optional accessories
a) Sodium lamp housing / pipe fitting with holder
b) Sodium vapour lamp (35 watts)
c) Sodium lamp transformer 35 watt
request a quote


1 - 2 - 3 - 4 - 5