Paper & Packaging Testing Equipments

These are used for testing the tensile strength and expansion of material like cables, wires, conductors, ferrous /non- ferrous and packaging material. Further, by using relevant grips and combining correct transverse speeds, tests can be conducted on it and in addition, bending and compression tests can also be conducted on it. The machines are made in different capacities as per ISO, BS, DIN & ASTM standards. These are floor mounted and provide accurate data (accuracy within 1 +) on the physical properties of materials in a very quick and simple manner.

Specifications :

GSM Round Cutters use a drawing action to cut accurate circular samples with smooth edge. Even difficult material as card board, filter paper, Craft paper, corrugated sheet, fine knit, thin film, synthetic leather, can be cut conveniently. Use: Put the sample sheet on the rubber pad and help of round cutter move half round on the sample sheet you will found sample for GSM Any desired size for samples ranging from thickness 0.01mm to 5mm can be produced

It is used to determine the bursting strength of packaging material. The Bursting Strength Tester is designed to find bursting strength of fabric/leather/paper/paper board. Different models are available in the range. A test specimen is held between two annular clamps under sufficient pressure to minimize slippage.

The Machine is used to check the physically properties of the paper , Boards, rubber and polymer products, It is vertical type with the upper gripping jaw attached to a load cell while the lower jaw attached to the top of the force exerting lead screw. The maximum available capacity with us is 200 kgf and having analogue as well as digital option.

It is used for measuring the tearing resistance of paper using Elmendorf principle. It has a menu based setup, pneumatic clamping of the test pieces, automatic calculations and presentation of measured value all of which ensure accurate and stable test results.

The weight per unit area or gramm age of any material in form of sheets is usually expresses as its GSM, that is its weight in grams per square metre of its area. It is one of the most important parameters to determine the quality of any paper. In addition to paper, it can also be used for evaluation of grammage of fabrics, coated fabrics, felt, plastic films and sheets, etc.

Box Compression Tester measures the compression strength of the corrugated box. The system is made of a set of plates one is attached to the load measuring arrangement and the other is movable plate which is move with the help of motor, gearbox, and screw and nut arrangement, the movable plate have the facility of over travel and under travel. The load measuring arrangement is also available in digital type. The box of which the compression strength is to be determined is placed on the lower plate, due to the motion of the movable plate the box is compressed and the compression load is directly read out on the digital indicator on the panel. The deflection of the box also measured with the help of the digital deflection indicator.